Why is my Lippert Slide Room not working?
While the hydraulic mechanisms of a Lippert system make the slide process much easier, there might be times when your slideroom doesn’t want to cooperate. More often than not, the cause is a jammed gear or drained battery, but motors occasionally become defective, leaving your room either permanently extended or retracted.
Why is my slideout awningtopper not extending?
We had a problem with our bedroom slide topper it would not allow slide to extend . Took it to an rv repair shop they adjusted the topper so it has about 4″ space between the slide and the awning. It somehow became tight against the slide, tight enough that the topper would bind and not extend.
How does a slide room work in a RV?
The invention of the hydraulic motor system drastically simplified the way RVers operate and maintain their slide room. Hydraulic systems, like the ones found in Lippert slide rooms, rely on limited space and the push of a button to extend and retract a full-sized bonus room for your rig.
Are there any problems with the slide out?
Most slide out problems are not that difficult to trace and then solve. There will be those that require the help of a professional technician to repair. The key would be to get to know your system and learn when the task is beyond your abilities to handle .
We had a problem with our bedroom slide topper it would not allow slide to extend . Took it to an rv repair shop they adjusted the topper so it has about 4″ space between the slide and the awning. It somehow became tight against the slide, tight enough that the topper would bind and not extend.
Why does my slide not retract or extend?
The slide would not retract or extend. We had some emergency fixes to bring the slide in so we could drive. Apparently, there are special considerations and tools that are necessary to align the full length slide. Has anyone had a problem with a slide topper hanging up when extending their slide?
What happens when the topper of a slide breaks?
The bottom line is when parts do break they can jam the topper and cause the bracket holding the topper to the coach to be ripped off when the slide is extended. Before the bracket gets ripped off the slide corner that the bracket mounts to is bent. Slides are very powerful. Not much stops their movement. The only other remedy is a DIY.
Can you put furniture on a slide out?
The rule of thumb, done by experience, says that adding an extra 1200 pound to the slide out will not hurt it at all. Some people have put heavy furniture on their slide outs, others have their appliances there and still they have no problem. But here is the twist.
While the hydraulic mechanisms of a Lippert system make the slide process much easier, there might be times when your slideroom doesn’t want to cooperate. More often than not, the cause is a jammed gear or drained battery, but motors occasionally become defective, leaving your room either permanently extended or retracted.
What to do when the slide out doesn’t slide?
A stray item wedged in your slide out can be an easy fix, so go check before tearing your motorhome apart looking for the slide motor. You’ll definitely hear the motor laboring if this is the problem, so make sure to keep an ear out for odd sounds too!
The invention of the hydraulic motor system drastically simplified the way RVers operate and maintain their slide room. Hydraulic systems, like the ones found in Lippert slide rooms, rely on limited space and the push of a button to extend and retract a full-sized bonus room for your rig.
Why is my slide out on my camper not working?
Also, if your chassis is bent, that will cause your camper slide out to bind. On top of that, check the openings your slide out is going through. There may be a problem there. Check to see if you have a manual over ride option you can use just in case. It may seem odd but some slide outs are designed to slide on the factory installed carpet.
A stray item wedged in your slide out can be an easy fix, so go check before tearing your motorhome apart looking for the slide motor. You’ll definitely hear the motor laboring if this is the problem, so make sure to keep an ear out for odd sounds too!
Why did my kitchen slide not come in?
After leaving Tucson and arriving in Lordsburg, NM (for a bomb cyclone layover) our kitchen slide would not deploy. Before we went full time we had a similar problem but the slide would not come in.
After leaving Tucson and arriving in Lordsburg, NM (for a bomb cyclone layover) our kitchen slide would not deploy. Before we went full time we had a similar problem but the slide would not come in.
What to do when slide outs don’t move?
Make sure the house batteries are charged completely, or if at all possible, plug your RV into shore power. This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins.
Can a single pump be used to retract slide outs?
In either instance you will probably find yourself at the mercy of an RV repairman, who may or may not have the parts needed for a quick repair on hand. Also, due to the inherent power of hydraulics, a single pump/motor is often used to extend/retract all slide-outs. When it works, you’re golden.
What happens when your slide out won’t slide out?
A stubborn slide-out, though, can turn your trip in to a disaster. Either you spend your days climbing over furniture in an attempt to live in an RV with the walls pushed in or you can’t depart for home with a slide-out that refuses to retract for road travel.
What to do when slide outs don’t slide in-RVing?
Consult with your owner’s manual to see if there is a way to close the slide out manually when the mechanism that is supposed to handle the job has failed. Most RV’s have some form of manual override to allow you to get back on the road successfully.
